Market Reports Center

CHEMICALS


The Chemicals Category includes research reports on Chemicals, Petrochemicals, Electrochemicals, Chemical Engineering, Biochemicals and various related markets.The chemical industry has increased its productivity over time and has distinguished itself by holding onto the resulting profitability gains.The chemical industry has benefited tremendously from China�s economic growth of the past two decades.Reports in this category will provide you with market insights, trends , analysis and forecast of Chemical Industry.

Total 13388 Reports Found - Showing Reports From 51 To 75

Petroleum and fuel dyes is general name for a family of aromatic substance, either organic or synthetic, which are used to add colour characteristics to Fuels and other petroleum products. These complex unsaturated substances have inherent characteristics like solubility and intense colour, and exhibits good affinity towards substrate on which it is being applied. Petroleum and Fuel Markers, on the other hand, are colourless substances, which when added to fuel, are detected by adding a specifi

View Details

Fluid catalytic cracking (FCC) is one of the most important conversion processes used in petroleum refineries. It is widely used to convert the high-boiling, high-molecular weight hydrocarbon fractions of petroleum crude oils into more valuable gasoline, olefinic gases, and other products. Scope of the Report: The FCC Catalysts are stable off-white, light yellow or yellow powders. They have a negligible solubility in water. They are composed of zeolite, silica, alumina, clay and binder. Almo

View Details

Hydrochloric acid was historically called acidum salis, muriatic acid, and spirits of salt and is a clear, colorless, highly pungent solution of hydrogen chloride (HCl) in water. It is a highly corrosive, strong mineral acid with many industrial uses. Scope of the Report: Hydrochloric acid consumption in Europe is relatively stable development in recent years?with a relatively stable state. However, Prices fell sharply, resulting in a sharp decline in sales value. The future trend of hydroc

View Details

Polycarbonates (PC) are a group of thermoplastic polymers containing carbonate groups in their chemical structures. Polycarbonates used in engineering are strong, tough materials, and some grades are optically transparent. They are easily worked, molded, and thermoformed. Because of these properties, polycarbonates find many applications. Polycarbonates do not have a unique resin identification code (RIC) and are identified as "Other", 7 on the RIC list. Scope of the Report: The main produc

View Details

Conduit is defined as a rigid or flexible metal or nonmetallic raceway through which cables can be pulled. Metal conduit, which typically comes in 10-foot lengths, is fairly rigid and requires special tooling and accessories to join it. Nonmetallic conduit is available on reels in longer, continuous lengths that do not have to be joined as often. Prewire is to install a wiring system in advance of it being used or needed. Scope of the Report: Pre-wired Conduits offers an all-in-one solution

View Details

Printing ink is colored glue stick, make of dye, binders and the additives, used for clothing and paper printing, and can be dried on the object to be printed. Scope of the Report: In 2015, global Ink & Toner total production reached 3212 K Tonnes, 16.08% more than that in 2011. USA and Japan were the major production regions, which accounted for 32% and 20% respectively. Survey results showed that the DIC was the leader ink manufacture, which accounted for 18% production market share in 201

View Details

Structural bolts are typically used for steel to steel applications. They are different from standard hex bolts by having heavy hex head to give it a larger bearing surface. Structural bolts also come with larger unthreaded shank compared to similar lengths to hex cap screws. Scope of the Report: Structural bolts are typically used for steel to steel applications. They are different from standard hex bolts by having heavy hex head to give it a larger bearing surface. Structural bolts also co

View Details

This report studies the CVD Diamond market, CVD is an acronym for chemical vapor deposition. This means that a material is deposited from a gas onto a substrate and that chemical reactions are involved. CVD Diamond is a synthetic diamond prepared by CVD techniques. Generally, low pressure of CVD diamond is applied. Scope of the Report: Based on type, the global CVD diamond market has been segmented into polished and rough types. Rough CVD diamond segment contributed for the largest share in

View Details

This report studies the Aircraft Carpet market. The local pressure of high heels would punch a hole in the aluminum or composite flooring, and a carpet is the lightest way to distribute the loads such that the local pressure from high heels can be tolerated. Besides, aircraft can also improve noise absorption and damping of vibrations. Today, both commercial aircraft and private aircraft are equipped with a carpet. Scope of the Report: There are main three kinds of aircraft carpets: 100% Woo

View Details

Bed Frames is the basic components of a bed, it is used to bearing the mattress. Scope of the Report: The worldwide market for Bed Frames is expected to grow at a CAGR of roughly xx% over the next five years, will reach xx million US$ in 2024, from xx million US$ in 2019, according to a new GIR (Global Info Research) study. This report focuses on the Bed Frames in global market, especially in North America, Europe and Asia-Pacific, South America, Middle East and Africa. This report categori

View Details

Vehicle retarder is a device usually used on heavy vehicles to augment or replace some of the functions of primary friction-based braking systems. For the working principal, the vehicle retarder is composed of stator part producing magnetic field and rotor part producing resistance torque through cutting the magnetic lines by rotating of the rotor, so the vehicle retarder can make vehicle decelerating through this torque. Scope of the Report: Briefly speaking, in the next few years, vehicle

View Details

Kinesio tape was invented by Kenzo Kase in 1979. It is a type of thin, elastic cotton tape that can stretch up to 140% of its original length. Compared with conventional tape, kinesio tape is more elastic and less mechanism constraints. Kinesio tape is developed primarily for the treatment of joint and muscle aches. Kinesio tape can be divided into roll form and pre-cut shape. The width of kinesio tape is usually from 25 mm to 100 mm and the length is from 3 m to 5 m. Among these different spec

View Details

Storage Tank are containers that hold liquids, compressed gases (gas tank) or mediums used for the short- or long-term storage of heat or cold. Storage tanks are often cylindrical in shape, perpendicular to the ground with flat bottoms, and a fixed or floating roof. There are usually many environmental regulations applied to the design and operation of storage tanks, often depending on the nature of the fluid contained within. Aboveground storage tanks (AST) differ from underground (UST) storag

View Details

Prothioconazole is one of two triazole fungicides (the other being epoxiconazole) reported to still provide a high level of eradicative and protective control of Septoria tritici. Scope of the Report: Geographically, the global Prothioconazole market has been segmented into EMEA, Latin America, North America and Asia Pacific The Latin America held the largest share in the global market, its revenue of global market exceeds 38% in 2017. The next is EMEA. Brazil is the largest consumption coun

View Details

Alloy steels are made by combining carbon steel with one or several alloying elements, such as manganese, silicon, nickel, titanium, copper, chromium and aluminum. These metals are added to produce specific properties that are not found in regular carbon steel. The elements are added in varying proportions (or combinations) making the material take on different aspects such as increased hardness, increased corrosion resistance, increased strength, improved formability (ductility); the weld abili

View Details

Silver paste is commonly used to form contact. Factors related to paste chemistry, process conditions and the solar cell wafers influence the contact quality. Scope of the Report: At present, in the foreign industrial developed countries the Silver Paste industry is generally at a more advanced level, the world's large enterprises are mainly concentrated in Europe and USA. Meanwhile, foreign companies have more advanced equipment, strong R & D capability, the technical level is in a leading

View Details

Armor materials refer to the materials which are used to strengthen and upgrade the armor. These armor materials are used in various armors such as helmet, vest, vehicle and others. Several global armor material manufacturers are developing and manufacturing light weight and durable armor materials. These lightweight armor systems are more effective in complex situations. Scope of the Report: Growing demand for motherland security, technological advancement of weapons, rising security issues

View Details

Plant Extracts is a kind of matter which extracts from the plant or the parts of plant by the suitable solvent or methods, it can used to the pharmaceutical industry, food industry, healthy industry, beauty industry and other industries. Scope of the Report: North America is mainly used for food additives. Plant Extracts is widely used in Europe for medicine industry. For the emerging market, China is expected to have high consumption in the next few years. For the demand of high concentrat

View Details

Diamond wire cutting (DWC) is the process of using wire of various diameters and lengths, impregnated with diamond dust of various sizes to cut through materials. Because of the hardness of diamonds, this cutting technique can cut through almost any material that is softer than the diamond abrasive. A "diamond wire" is a tool used to thinly slice rectangular silicon ingots that are pre-cut to the dimensions of each wafer. It is a threadlike slicing tool made with a thin piano wire with diamond g

View Details

Terrazzo originated in Italy, where marble-workers would take the crumbs of their work home, mix them with cement and create faux-stone floors for their terraces. Since then, terrazzo floors have grown into an art form all their own with a wide range of styles and possibilities. Classic terrazzo is a mixture of marble fragments, called the aggregate, and a cementations binding agent, called the matrix. It is resilient and can be used inside and outside and it can be cast in place or laid in manu

View Details

Organic pigments are colored, black, white or fluorescent particulate organic solids which usually are insoluble in, and essentially physically and chemically unaffected by, the vehicle or substrate in which they are incorporated. They alter appearance by selective absorption and/or by scattering of light. Organic pigments are usually dispersed in vehicles or substrates for application, as for instance in the manufacture or inks, paints, plastics or other polymeric materials. Organic pigments re

View Details

Automotive Die Casting Lubricant is a substance introduced to reduce friction between surfaces in automotive metal casting process. It may also have the function of transmitting forces, transporting foreign particles, or heating or cooling the surfaces. Scope of the Report: Automotive Die Casting Lubricant is a substance introduced to reduce friction between surfaces in automotive metal casting process. It may also have the function of transmitting forces, transporting foreign particles, or

View Details

Decorative Wall Tile is a manufactured piece of hard-wearing material such asceramic, stone, metal, or even glass, generally used for decorating wall. Alternatively, tile can sometimes refer to similar units made from lightweight materials such as perlite, wood, and mineral wool. Scope of the Report: Decorative wall tiles are Decorative Wall Tiles are manufactured piece of hard-wearing materials such asceramic, stone, metal, or even glass, generally used for decorating wall. The production

View Details

Synthetic Leather is a manmade fabric that looks like leather. It has leather like surface and is dyed and treated to make it have the look and feel of real leather. It is often used as a substitute for real leather because it is less expensive and it does not require using a real animal hide to create. Scope of the Report: The market is very fragmented. Several leading players are adopting the strategy of competitive pricing to gain a better foothold in the market. Some of the prominent pla

View Details

Propylene glycol monomethyl ether acetate (PGMEA/PMA), also known as propylene glycol methyl ether acetate, is a colorless hygroscopic liquid with a special odor. It is a non-polluting solvent with multi-functional groups. Its molecular formula is C6H12O3. It is mainly used as a solvent for printing ink, paint, textile dyes, and textile oil. The electronic grade, which is further purified, can be used as the photoresist solvent and cleaning agent in the production of semiconductor and liquid cry

View Details

Market Reports Center © Copyright 2019 All rights reserved.

wire transfer
HDFC
ssl