Market Reports Center

CHEMICALS


The Chemicals Category includes research reports on Chemicals, Petrochemicals, Electrochemicals, Chemical Engineering, Biochemicals and various related markets.The chemical industry has increased its productivity over time and has distinguished itself by holding onto the resulting profitability gains.The chemical industry has benefited tremendously from China�s economic growth of the past two decades.Reports in this category will provide you with market insights, trends , analysis and forecast of Chemical Industry.

Total 13388 Reports Found - Showing Reports From 76 To 100

Animal Growth Promoters are feed additives that used to help increase the efficiency of animal production by increasing weight gain and product output. Animal Growth promoters can be classified into four groups; those that increase growth and also increase feed consumption, those that increase growth without altering feed consumption, those that do not alter growth but decrease feed consumption (generally referred to as the feed consumption ratio; FCR=kg feed consumed/kg body weight), and those

View Details

Cyanate ester resins are an important class of thermosetting polymers with high glass-transition temperature, low outgassing, and low dielectric constant and loss. These resins are used in a variety of applications such as printed circuit boards, radomes, structural composites for space applications, and adhesives. Scope of the Report: Cyanate Ester Resin production market is relatively concentrated. North America and Europe are the major production areas as well as the leading consumption m

View Details

Nylon 6, is a polymer developed by Paul Schlack at IG Farben to reproduce the properties of nylon 6.6 without violating the patent on its production. It was given the trademark Perlon® in 1952. Scope of the Report: There are many types of nylon 6 commercially available. However, GF 30% reinforced type occupied the most market share. Based on end-use industries, nylon 6 are widely used on Automotive part production, E & E industries, consumer durables?food and industry In USA market, autom

View Details

Peat is a dark fibrous material created when 'decomposition fails to keep pace with the production of organic matter'. Although peat is created under specific conditions (waterlogging, lack of oxygen or nutrients, high acidity or low temperatures), peat can be found in many types of wetlands. Marshes, swamps, floodplains and coastal wetlands may contain peat. Scope of the Report: In 2015, Europe is the largest supplier and consumption market of peat with revenue market share of 90.92% due to

View Details

This report studies the Mg-Al-Zinc Coated Carbon Steel market, Mg-Al-Zinc Coated Carbon Steel is a new type of galvanized steel on which aluminum-magnesium alloy coating by zinc (Zn), aluminum (Al) (3.5-11)%, magnesium (Mg) 3% to form high-temperature curing. Its structure by Zn, Al and Zn2-Mg the dense structure constitutes a total of three, so that the steel surface to form a layer of compact and effective to prevent corrosion factor through the barrier. Scope of the Report: Geographically

View Details

Coral Calcium is a salt of calcium derived from fossilized or live coral reefs. The coral calcium market is dominated by Okinawa coral calcium and Brazilian coral calcium. Scope of the Report: On a global scale, the high-tech Coral Calcium product is in the early stages of the global industrialization. The whole Coral Calcium market is driven by the new protein extraction technology, advanced R&D initiatives, and rising vegetarian population. Japan is the first country discovering Coral Cal

View Details

Guanidinoacetic Acid is a metabolite of glycine in which the amino group has been converted into a guanidine. Guanidinoacetic Acid is a direct precursor of creatine and is used as a supplement. Taking guanidinoacetic acid can increase muscle strength and slow muscle fatigue, etc. And add guanidinoacetic acid into fodder can make lean pig's body improve significantly. Scope of the Report: In consumption market, the growth rate of global consumption is smooth relatively. China and Europe are s

View Details

Compression packing which is also called braided packing or rope packing. Braided packing is a rope like material which is cut into rings that wrap around the rod. Once installed the compression force generated by tightening of the gland produces radial pressure. Since braided packing expands radially when compressed, the gland tolerances can be more flexible than when using vee packing. Scope of the Report: Braided packing is usually produced in a square or rectangular cross section and is

View Details

Cored wire electrodes, also simply called cored wire, are small tubes filled with metallic or mineral powders, used for steelmaking and casting applications. They are manufactured as wire with the proper diameters in molding or drawing lines. They have higher deposition efficiency than solid wire, which in turn speeds welding tasks. The core of metal-cored wire contributes almost entirely to the deposited weld metal. This report is focused on metallurgical cored wire type. According to the diff

View Details

This report studies the Fire Retardant Treated Wood market, from angles of players, regions, product types and end industries, to analyze the status and the future. Whether installing fire-rated panels due to personal safety concerns or because of adherence to the specific building codes and jurisdiction in which you live, is important to know something about the various aspects of fire retardant treated (FRT) wood and its benefits. Fire retardant treating is available for both plywood and for

View Details

High purity aluminum is refers to mental content of aluminum more than 99.99% (99.99%, 99.999%, 99.9999%, etc.). Scope of the Report: The worldwide market for High Purity Aluminum is expected to grow at a CAGR of roughly xx% over the next five years, will reach xx million US$ in 2024, from xx million US$ in 2019, according to a new GIR (Global Info Research) study. This report focuses on the High Purity Aluminum in global market, especially in North America, Europe and Asia-Pacific, South A

View Details

Sun care products are products that are in the form of cream gel lotion and sprays among others which are used to protect against harmful rays of the sun (UV rays) thus avoiding sunburn. The Sun care products market is generally segmented into three broad product types: Sun Protection Products, After Sun Products and Self-Tanning Care Products. Sun care products are usually in Cream, Lotion, Gel, Powder, Wipes, Spray or some other forms. Scope of the Report: Sun care products are classically

View Details

Helium is a chemical element with symbol He and atomic number 2. It is a rare atmospheric gas which is colorless, odorless, tasteless, nontoxic, nonflammable and only slightly soluble in water. The concentration of Helium in the atmosphere by volume percent is 5.24 x 10-4. Its boiling points and melting points are the lowest among all the elements and it exists only as a gas except in extremely cold conditions. Scope of the Report: The Helium industry concentration is very high; as a result

View Details

Glucose is a sugar with the molecular formula C6H12O6. Dextrose is also a simple sugar. It is an isomer of glucose, D-glucose. Maltodextrin consists of D-glucose units connected in chains of variable length. The glucose units are primarily linked with ?(1?4) glycosidic bonds. Maltodextrin is typically composed of a mixture of chains that vary from three to 17 glucose units long. Scope of the Report: The technical barriers of Glucose, Dextrose and Maltodextrin are relatively low, which leads

View Details

Ion-exchange membranes transport dissolved ions across a conductive polymeric membrane.The membranes are often used in desalination and chemical recovery applications, moving ions from one solution to another with little passage of water. Ion-exchange membranes are made of a polymeric material attached to charged ion groups. Anion-exchange membranes contain fixed cationic groups with predominantly mobile anions; because anions are the majority species, most of the conductivity is due to anion tr

View Details

A superhard material is a material with a hardness value exceeding 40 gigapascals (GPa) when measured by the Vickers hardness test. They are highly incompressible solids with high electron density and high bond covalency. As a result of their unique properties, these materials are of great interest in many industrial areas including, but not limited to, abrasives, polishing and cutting tools and wear-resistant and protective coatings. Diamond is the hardest known material to date, with a Vickers

View Details

We statistic Jams, Fillings and Glazes used in Bakery industry respectively in this report. Scope of the Report: The Bakery (Jams, Fillings and Glazes) industry is not highly concentrated, there are more than one hundred manufacturers in the world, and high-end products mainly come from USA and Europe. The import and export business of this industry is not frequent. The main reason lies in that many international manufacturers expand their business through building factories or investments

View Details

Steel rebars are used as tensile devices in reinforced concrete to provide strength and hold the concrete in tension. Besides the high-tensile strength, rebars also absorb energy, adapt to extreme weather conditions, and hold stress during natural calamities which make them indispensable in the construction industry. Scope of the Report: The rebar with major diameters between 8mm and 25mm finds application in Infrastructure (road, bridges, and highways), Housing, and Industrial (Gas and Oil

View Details

Sodium Borohydride, also known as sodium tetrahydridoborate, is a white solid, usually encountered as a powder, widely used as a reducing agent in various industries like pharmaceuticals, pulp & paper, metal recovery, textiles, organic chemical purification and others. Scope of the Report: The sodium borohydride market is very concerted market; the revenue of top seven manufacturers accounts about 90% of the total revenue in 2016. The high-end products mainly come from USA and Europe. The le

View Details

Coupling is a device used to connect two shafts together at their ends for the purpose of transmitting power. Couplings do not normally allow disconnection of shafts during operation, however there are torque limiting couplings which can slip or disconnect when some torque limit is exceeded. Scope of the Report: The Coupling is Very fragmented, the production of top sixteen manufacturers only account about 10% of global production. The high-end products mainly come from Europe and North Amer

View Details

A mosquito Repellants is a substance that are applied on human skin, clothing or other surfaces that prevent mosquitoes from sitting or crawling on that surface. Wide variety of mosquito Repellants are being used to keep the mosquitoes away and prevent mosquito-borne diseases such as malaria, dengue, chikungunya, yellow fever, Zika virus, and others. Popularly used chemical ingredients in the preparation of mosquito Repellants include diethyl carbonate, ethyl hexane diol, N-diethyl-3-methylbenza

View Details

Ferroelectricity is the phenomenon where spontaneous electric polarization of the material takes place. Ferroelectricity is used in various fields of electronics. The materials exhibiting the phenomenon of Ferroelectricity are called Ferroelectric Materials. Scope of the Report: The industry is highly concentration. Most manufacturers are distributed in Japan. Japan dominated producer of Ferroelectric Materials. Japan is the largest market segment of Ferroelectric Materials, with a consumpti

View Details

Electrical contacts are soft, high-conductivity, oxidation-resistant materials used as the makeup of electrical components. They are the materials in a system through which an electrical current flows. Scope of the Report: At present, in developed countries, the electrical contacts and contact materials industry is generally at a more advanced level. The world's enterprises are mainly concentrated in China (include foreign companies). China’s electrical contacts and contact materials indust

View Details

Valve sacks also known as valve bags are designed for high speed filling on spout packers and are usually used to hold granular products from fine powders such as cement, through to plastic polymers, crumb rubber and granular foodstuffs such as sugar. Valve sacks are available made from paper, extruded plastic (LDPE), raffia or woven polypropylene etc. This report focus on the valve bags from 20 to 100 pounds. Scope of the Report: Valve bag market concentration is low, and a large number of

View Details

In integrated circuit packaging, a solder ball, also a solder bump (often referred to simply as "ball" or "bumps") is a ball of solder that provides the contact between the chip package and the printed circuit board, as well as between stacked packages in multichip modules. The Solder Ball can be placed manually or by automated equipment, and are held in place with a tacky flux. Solder Ball are very small spheres of high-purity solder for micro soldering system. The most important advantages of

View Details

Market Reports Center © Copyright 2019 All rights reserved.

wire transfer
HDFC
ssl