Market Reports Center

ELECTRONICS


The electronics industry is continuously being challenged by its demanding consumer base. The players operating in this industry must be opportunistic hunters to grab the attention of potential consumers. Electronics and semiconductor industry to take a predominant position in the future as its growth gains support from advancements in technology.Despite being dominated by developed economies, such as the U.S., several regions can rest their growth prospects on the rising demand for electronic and semiconductor components. The electronics Category includes research reports on providing global and regional segmentation.

Total 3669 Reports Found - Showing Reports From 126 To 150

A tablet touch panel is a piece of equipment that lets users to interact with a tablet by touching the screen directly. Incorporating features into the monitor like sensors that detect touch actions makes it possible to issue instructions to a tablet PC by having it sense the position of a finger or stylus. Essentially, it becomes a device fusing the two functions of display and input. Scope of the Report: In the tablet PC market, brands, whether they are high end like Apple and Samsung or l

View Details

Safety Sensors is a general term attributed to the sensors used for detection of distance, absence or presence of any object in a restricted zone during physical operations. The Safety Sensors are also denoted as Photo Electric/Opto-Electronic Sensors as they are based on the photoelectric principle of using electromagnetic waves viz, electric, magnetic and light. The safety sensors are present either in the form of sensors, switches or buttons. In this report, we covered the safety sensors and

View Details

A Signal Booster (also known as cellular repeater or amplifier), in the cell phone industry, is a device used for boosting the cell phone reception to the local area by the usage of a reception antenna, a signal amplifier, and an internal rebroadcast antenna. These are similar to the cellular broadcast towers used for broadcasting by the network providers, but are much smaller, usually intended for use in one building. Modern cellular repeater amplifiers can rebroadcast cellular signals inside a

View Details

Balanced Armature Speakers are based on balanced armature technology (BAX) and are utilized in a variety of high performance audio and communication products. Balanced armature drivers use an electronic signal to vibrate a tiny reed that is balanced between two magnets inside a tiny enclosure. The motion of the reed is transferred to a very stiff aluminum diaphragm. This diaphragm is free of resonances in the audio band, allowing it to produce excellent clarity. Scope of the Report: The tech

View Details

An inertial measurement unit (IMU) sensor is an electronic device that measures and reports a craft's velocity, orientation, and gravitational forces, using a combination of accelerometers and gyroscopes, sometimes also magnetometers. In this report, the high performance IMU sensors were counted and analyzed. We take into account industrial, aerospace, defense applications (even industrial applications are considered as “high-performance” applications, as opposed to consumer ones). This refers

View Details

Non-Contact Temperature Sensors, whose the sensing element does not contact with the measured object, is also called as non-contact thermometers. This type of sensors is used to measure the temperature of moving objects, small objects or objects whose temperature change rapidly. And also be used for measurement of temperature distribution. Non-contact (infrared) temperature sensing reads temperature by intercepting a portion of the infrared energy emitted by an object or substance, and detecting

View Details

RF Coax Connectors are typically used to connect coaxial cable, Micro strip line or other RF transmission lines, with the functions of transmission line electrical connection or separating, and different type transmission line switching. RF Coax Connector is an electrical connector designed to work at radio frequencies in the multi-megahertz range. It can not only be used in the field of wireless communications, but also be widely used in the field of satellite, radar, computers, televisions, c

View Details

A session border controller (SBC) is a dedicated hardware device or software application that governs the manner in which phone calls are initiated, conducted and terminated on a Voice over Internet Protocol (VoIP) network. An SBC provides security, interoperability, routing and other functions in a Session Initiation Protocol (SIP) network. It defines and monitors the quality of service (QoS) status for all sessions, ensuring that the callers can actually communicate with each other and that em

View Details

An oscilloscope is a type of electronic test instrument that allows observation of constantly varying signal voltages, usually as a two-dimensional plot of one or more signals as a function of time. Non-electrical signals (such as sound or vibration) can be converted to voltages and displayed. Oscilloscopes are used to observe the change of an electrical signal over time, such that voltage and time describe a shape which is continuously graphed against a calibrated scale. The observed waveform c

View Details

The semiconductor industry is broadly divided into analog and digital semiconductor products. Analog semiconductors condition and regulate “real world” functions such as temperature, speed, sound and electrical current. Digital semiconductors process binary information, such as that used by computers. Mixed-signal devices incorporate both analog and digital functions into a single chip and provide the ability for digital electronics to interface with the outside world. The market for analog

View Details

LCD Monitor Arm is a device used to attach to a computer screen or TV. It is easily adjustable which means it requires minimum effort but can achieve maximum precision. From the structure of LCD Monitor Arms, it can be classified into three kinds, they Single Arm, Double Arm and Muti-Arm. From the material, it can be divided as Carbon steel LCD Arms and Aluminum LCD Arms. Scope of the Report: Regionally, China is the biggest Consumption area of LCD Monitor Arm in the world and china is the

View Details

A lead frame consists of a die mounting paddle and lead fingers. The die paddle serves primarily to mechanically support the die during package manufacture. The lead fingers connect the die to the circuitry external to the package. Scope of the Report: The lead frame market itself has gone from a growth market to the mature phase, resulting in over-commoditization of lead frame products. According to the report, global revenue for lead frame was valued at $ 3781.24 million in 2017, and is ex

View Details

Explosion-Proof Lighting (also known as hazardous location lighting and intrinsically safe lights) are lighting products, which are certified in accordance with and compliant to International regulative bodies and compliant to recognized safety standards. Scope of the Report: In North America, total LED-Based Lamps Used in Explosion-Proof Lighting accounted for 26.57%. In the Europe 27.45%, in Asia-Pacific 35.53%, in Latin America 4.73% and in Middle East and Africa 5.71%. Among all regions,

View Details

Internet protocol camera, or IP Cameras, is a type of digital video camera commonly employed for surveillance, and which, unlike analog closed circuit television (CCTV) cameras, can send and receive data via a computer network and the Internet. Although most cameras that do this are webcams, the term "IP Cameras" or "netcam" is usually applied only to those used for surveillance. The first centralized IP Cameras was Axis Neteye 200, released in 1996 by Axis Communications. Scope of the Report

View Details

A soundbar, also called a speakerbar, is a special speaker with multiple drivers, which is much wider than it is tall, and always put above a computer monitor or under a television or home theater screen. It can significantly improve the sound experience of consumers, without complex matters of surround sound speakers, wiring, etc. for whole family Theatre. Scope of the Report: The Soundbars is classified into the Wall-mounted Type, Mobile Type, according to the installation method. As of 20

View Details

Board-to-board (BTB) connectors are used to connect printed circuit boards (PCB), electronic components that contain a conductive pattern printed on the surface of the insulating base in an accurate and repeatable manner. Each terminal on a BTB connector is connected to a PCB. A BTB connector includes housing and a specific number of terminals. The terminal is made from a conductive material (mostly copper alloy), and plated to improve conductivity and antirust. Terminals transmit the current/si

View Details

The Merchant Embedded Computing is an integral part of a larger system that performs a particular task and consists of a microprocessor or a microcontroller, which acts as the processing core. The Merchant Embedded Computing is a computer that is integrated into other devices and is dedicated to the functions of that device. Also referred to as microcontrollers, The Merchant Embedded Computing has been used in Medical machinery, motor vehicles, application Defense & Aerospace, Communications, M

View Details

This report studies the Power Inductors market, a power inductor is a solid state electronic component that receives and stores electrical energy utilizing a magnetic field. This field is typically created with tightly coiled conductive wire such as copper. Scope of the Report: TDK, Murata, Vishay captured the top three production value share spots in the Power Inductors market in 2017. TDK dominated with 14.89% revenue share, followed by Murata with 12.22% revenue share and Vishay with 7.12

View Details

FM transmitter is the short of FM broadcast transmitter, mainly used for launch the voice and music programs of FM broadcast station by wireless methods. Currently, the major demand region are Africa, South America, Southeast Asia and South Asia other economically underdeveloped areas. Scope of the Report: RVR dominated the market, with accounted for 15.37% of the FM Broadcast Transmitters sales market share in 2016. Worldcast Ecreso, Elenos are the key players and accounted for 8.54%, 12.94

View Details

The Microelectromechanical Systems market was valued at Million US$ in 2018 and is projected to reach Million US$ by 2025, at a CAGR of during the forecast period. In this study, 2018 has been considered as the base year and 2019 to 2025 as the forecast period to estimate the market size for Microelectromechanical Systems. This report presents the worldwide Microelectromechanical Systems market size (value, production and consumption), splits the breakdown (data status 2014-2019 and foreca

View Details

The Semiconductor Silicon Wafer market was valued at Million US$ in 2018 and is projected to reach Million US$ by 2025, at a CAGR of during the forecast period. In this study, 2018 has been considered as the base year and 2019 to 2025 as the forecast period to estimate the market size for Semiconductor Silicon Wafer. This report presents the worldwide Semiconductor Silicon Wafer market size (value, production and consumption), splits the breakdown (data status 2014-2019 and forecast to 202

View Details

The RF Test Equipment market was valued at Million US$ in 2018 and is projected to reach Million US$ by 2025, at a CAGR of during the forecast period. In this study, 2018 has been considered as the base year and 2019 to 2025 as the forecast period to estimate the market size for RF Test Equipment. This report presents the worldwide RF Test Equipment market size (value, production and consumption), splits the breakdown (data status 2014-2019 and forecast to 2025), by manufacturers, region,

View Details

The Vacuum Circuit Breaker market was valued at Million US$ in 2018 and is projected to reach Million US$ by 2025, at a CAGR of during the forecast period. In this study, 2018 has been considered as the base year and 2019 to 2025 as the forecast period to estimate the market size for Vacuum Circuit Breaker. This report presents the worldwide Vacuum Circuit Breaker market size (value, production and consumption), splits the breakdown (data status 2014-2019 and forecast to 2025), by manufact

View Details

The Broadband Router market was valued at Million US$ in 2018 and is projected to reach Million US$ by 2025, at a CAGR of during the forecast period. In this study, 2018 has been considered as the base year and 2019 to 2025 as the forecast period to estimate the market size for Broadband Router. This report presents the worldwide Broadband Router market size (value, production and consumption), splits the breakdown (data status 2014-2019 and forecast to 2025), by manufacturers, region, typ

View Details

The Hi-Fi Audio market was valued at Million US$ in 2018 and is projected to reach Million US$ by 2025, at a CAGR of during the forecast period. In this study, 2018 has been considered as the base year and 2019 to 2025 as the forecast period to estimate the market size for Hi-Fi Audio. This report presents the worldwide Hi-Fi Audio market size (value, production and consumption), splits the breakdown (data status 2014-2019 and forecast to 2025), by manufacturers, region, type and applicati

View Details

Market Reports Center © Copyright 2019 All rights reserved.

wire transfer
HDFC
ssl