Market Reports Center

ENERGY AND POWER RESOURCES


Publications listed in the Energy and Natural Resource section cover both ‘conventional’ fuels, such as gas (LPG and LNG), coal and mining (Exploration and Production; Oilfield Equipment and Services category), hydro power, and nuclear power; and newer sources such as fuel cells, biofuels, solar power, and wind power. They provide up-to-date, reliable information into market trends, leading companies, sales and marketing strategies, historic data and forecasts, with specifics on market share, segmentation, size, and growth, as well as technical issues. It also includes environmental technologies, sustainability, ecological engineering, and energy saving.

Total 523 Reports Found - Showing Reports From 76 To 100

Waste heat to power (WHP) is the process of capturing heat discarded by an existing industrial process and using that heat to generate power. Energy intensive industrial processes—such as those occurring at refineries, steel mills, glass furnaces, and cement kilns—all release hot exhaust gases and waste streams that can be harnessed with well-established technologies to generate electricity (see Appendix). The recovery of industrial waste heat for power is a largely untapped type of combined h

View Details

In electrical engineering, an electrical switch is an electrical component that can "make" or "break" an electrical circuit, interrupting the current or diverting it from one conductor to another. The mechanism of a switch removes or restores the conducting path in a circuit when it is operated. It may be operated manually, for example, a light switch. Scope of the Report: Legrand, Siemens, Simon and ABB captured the top four revenue share spots in the electrical switches market in 2016. Leg

View Details

Hydrogen and Fuel Cells use hydrogen as a chemical element, and are made into batteries that store energy. The basic principle is the reverse reaction of electrolysis of water, hydrogen and oxygen were supplied to the cathode and anode, hydrogen diffusion through the cathode and the electrolyte reaction, the release of electrons through the external load to reach the anode. Scope of the Report: North America was the largest consumption market with a market share of 56.55% in 2012 and 60.27%

View Details

A lithium-ion battery or Li-ion battery is a type of rechargeable battery in which lithium ions move from the negative electrode to the positive electrode during discharge and back when charging. Li-ion batteries use an intercalated lithium compound as one electrode material, compared to the metallic lithium used in a non-rechargeable lithium battery. The electrolyte, which allows for ionic movement, and the two electrodes are the constituent components of a lithium-ion battery cell. Scope of

View Details

This report studies the Medium Voltage Vacuum Contactors market, Vacuum contactors utilize vacuum bottle encapsulated contacts to suppress the arc. This arc suppression allows the contacts to be much smaller and use less space than air break contacts at higher currents. As the contacts are encapsulated, vacuum contactors are used fairly extensively in dirty applications, such as mining. Vacuum contactors are also widely used at medium voltages from 1000-5000 volts, effectively displacing oil-fil

View Details

Battery Storage Inverter is a special type of grid-connected inverters, who can be bi-directional inverter. It can store electric energy, in accordance with the unified deployment of the smart grid to release energy. At present, it used in the field of photovoltaic power generation. Scope of the Report: Battery storage inverter is a special type of grid-connected inverters, who can be bi-directional inverter. It can store electric energy, in accordance with the unified deployment of the smar

View Details

A lithium-ion battery or Li-ion battery is a type of rechargeable battery in which lithium ions move from the negative electrode to the positive electrode during discharge and back when charging. Li-ion batteries use an intercalated lithium compound as one electrode material, compared to the metallic lithium used in a non-rechargeable lithium battery. The electrolyte, which allows for ionic movement, and the two electrodes are the constituent components of a lithium-ion battery cell. Cells with

View Details

The amorphous is a non-crystal substance created by rapidly freezing liquids of high temperature. Because there is no rule of atomic arrangement, the energy loss (hysteresis loss) is small when the flux of magnetic induction passes the iron core. In addition, eddy current loss is decreased because the thickness is approximately 0.03 mm, which is about 1/10 comparing with silicon steel. Therefore, the no load loss (eddy current loss and hysteresis loss) can be decreased to about 1/5 of silicon st

View Details

This report studies the Coal Water Slurry market. Coal-water slurry fuel is a combustible mixture of fine coal particles suspended in water. It can be used to power boilers, gas turbines, diesel engines and heating and power stations. A coal-water slurry fuel is defined by a number of factors including its viscosity, particle size, rate of sedimentation, ignition temperature (800–850 °C [1,470–1,560 °F]), combustion temperature (950–1,150 °C [1,740–2,100 °F]), ash content and calorific

View Details

Battery is a collection of one or more cells whose chemical reactions create a flow of electrons in a circuit. All batteries are made up of three basic components: an anode (the ‘-’ side), a cathode (the ‘+’ side), and some kind of electrolyte (a substance that chemically reacts with the anode and cathode). Scope of the Report: For industry structure analysis, the Battery industry is concentrated. These manufacturers are large multinational corporations. The top ten producers account for

View Details

Power Generation Equipment is useful appliances that supply electrical power during a power outage and prevent discontinuity of daily activities or disruption of business operations. Power Generation Equipment is available in different electrical and physical configurations for use in different applications. Scope of the Report: In the coming years there is an increasing demand for Power Generation Equipment in the regions of US and Europe that is expected to drive the market for more advan

View Details

The lead-acid battery is a rechargeable battery technology available in the market, which is generally used in numerous applications such as motive, automotive, and stationary applications. These batteries are utilized in automotive applications majorly due to their cranking property, which provides the power within a short span. Scope of the Report: The passenger cars segment dominated the global automotive lead acid batteries market in 2017, followed by the LCVs & HCV’s. The passenger car

View Details

Solar Ingot Wafer is a kind of raw materials used for solar cell. Generally, this material mainly by the high-purity polysilicon feedstock crystal or ingot obtained by pulling ingots, after cutting by the steel wire into very thin (200 microns) round or square of the film which is called silicon wafer. Scope of the Report: The increasing capacity and production of solar cells drive the rapid development of Solar Ingot Wafer industry. As Chinese overall economic downward trend in the past fe

View Details

A protonic ceramic fuel cell (PCFC) is a fuel cell based on a ceramic electrolyte material that exhibits high protonic conductivity at elevated temperatures. PCFCs share the thermal and kinetic advantages of high temperature operation at 700 degrees Celsius with molten carbonate and solid oxide fuel cells, while exhibiting all of the intrinsic benefits of proton conduction in proton exchange membrane fuel cells (PEMFC) and phosphoric acid fuel cells (PAFC). The high operating temperature is nece

View Details

Printed batteries are fabricated through simple, low-cost, and scalable printing processes. They have many advantages such as thin, flexible, low cost and easy to integrate. It is expected that the performance and integration potential of printed battery can be increased rapidly and will drive demand for printed battery. Other potential markets for printed battery are smart card, ID card, greeting cards, smart packaging, advertisement, medical patch and health monitoring. Scope of the Report:

View Details

Offshore Wind Power is the generation of electricity from wind by constructing wind farms in water bodies. It is estimated to be one of the cheapest and cleanest forms of electricity generation. Offshore wind turbines are larger in size and have greater wind speed compared with onshore wind turbines. Offshore wind power offers various advantages compared with onshore wind power. Scope of the Report: With regards to the world economy of 2015, recovery of China and other developing countries e

View Details

Motor vehicle battery is an automotive battery that powers the starter motor, the lights, and the ignition system of a vehicle's engine, mainly in combustion vehicles. Motor vehicle battery is usually lead-acid type, and is made of six galvanic cells connected in series to provide a nominally 12-volt system. Scope of the Report: As international economic situation is complicated, in the next few years there will be many uncertainties although. Due to the government’ policy and the high prod

View Details

Automotive Starting Battery is an automotive battery that powers the starter motor, mainly in combustion vehicles. Automotive Starting Battery is usually lead-acid type, and is made of six galvanic cells connected in series to provide a nominally 12-volt system. Scope of the Report: As international economic situation is complicated, in the next few years there will be many uncertainties although. Due to the government’ policy and the high production of Automotive Starting Battery in the in

View Details

Zinc-Air Batteries is metal-air batteries powered by oxidizing zinc with oxygen from the air. These batteries have high energy densities and are relatively inexpensive to produce. Sizes range from very small button cells for hearing aids, larger batteries used in film cameras that previously used mercury batteries, to very large batteries used for electric vehicle propulsion. Scope of the Report: The technical barriers of Zinc-Air Batteries are relatively high, and the Zinc-Air Batteries mar

View Details

Scope of the Report: The worldwide market for Urban Gas is expected to grow at a CAGR of roughly xx% over the next five years, will reach xx million US$ in 2024, from xx million US$ in 2019, according to a new GIR (Global Info Research) study. This report focuses on the Urban Gas in global market, especially in North America, Europe and Asia-Pacific, South America, Middle East and Africa. This report categorizes the market based on manufacturers, regions, type and application. Market Segmen

View Details

A Gel battery design is typically a modification of the standard lead-acid automotive or marine battery. A gelling agent is added to the electrolyte to reduce movement inside the battery case. Many gel batteries also use one-way valves in place of open vents, which help the normal internal gasses to recombine back into water in the battery, reducing gassing. Generally, gel batteries are less tolerant of high heat and are charged at lower power than traditional or AGM batteries. Scope of the R

View Details

A perovskite solar cell is a type of solar cell which includes a perovskite structured compound, most commonly a hybrid organic-inorganic lead or tin halide-based material, as the light-harvesting active layer. Perovskite materials such as methylammonium lead halides are cheap to produce and simple to manufacture. Scope of the Report: Perovskite solar cells module has obtained great attention from the research center and the conversion efficiency has increased for times science its first rep

View Details

Gas to liquids (GTL) is a refinery process to convert natural gas or other gaseous hydrocarbons into longer-chain hydrocarbons such as gasoline or diesel fuel. Methane-rich gases are converted into liquid synthetic fuels either via direct conversion using the new GasTechno® non-catalytic gas-to-liquids process that converts methane to methanol in one step. Or via syngas as an intermediate, for example using the Fischer Tropsch or Mobil processes. Scope of the Report: GTL Diesel accounts for

View Details

The role of the low voltage power distribution system in a building of any kind is to receive electrical power at one or several supply points and to deliver it to individual electrically operated devices. The importance of the power distribution system to the proper function of a building makes it highly critical, meaning the best system and its protection is vital. In the report, the information is only about the low voltage power distribution system used in Industrial Sites field, not includ

View Details

Hydrogen fuel cells use hydrogen as a chemical element, and are made into batteries that store energy. The basic principle is the reverse reaction of electrolysis of water, hydrogen and oxygen were supplied to the cathode and anode, hydrogen diffusion through the cathode and the electrolyte reaction, the release of electrons through the external load to reach the anode. A hydrogen fuel cell is a power plant that utilizes the inverse process of electrolyzed water to generate electricity as well

View Details

Market Reports Center © Copyright 2019 All rights reserved.

wire transfer
HDFC
ssl