Market Reports Center

Total 43104 Reports Found - Showing Reports From 76 To 100

Next generation modular control systems and communications technology will enable wireless monitoring and control functions both on and off board. These will include advanced decision support systems to provide a capability to operate ships remotely under semi or fully autonomous control. Scope of the Report: In the coming years there is an increasing demand for Autonomous Ships in the regions of United States and Europe that is expected to drive the market for more advanced Autonomous Ships

View Details

A desiccant dehumidifier operates on a totally different principle to a refrigerant type. The main benefit of a desiccant dehumidifier is that it performs exceptionally well when used in cooler climates, or when a low dew point is required. As there is no actual water produced during the process, these units can work effectively at sub-zero temperatures. Scope of the Report: In the coming years there is an increasing demand for desiccant dehumidifiers in the regions of North America and Euro

View Details

Anti-counterfeiting packaging is the process of assigning secure packaging to the product in order to minimize counterfeiting or infringement. The purpose of anti-counterfeiting packaging is to prevent imitation and confirms safety of the goods. Scope of the Report: Amid increasingly stringent security regulations and an alarmingly high number of fake products on the market, anti-counterfeiting technologies are the latest trend to take the packaging industry by storm. Currently, the industr

View Details

Pressure Washer is a Pressure Washers or power washer that is a high-pressure mechanical sprayer used to remove loose paint, mold, grime, dust, mud, and dirt from surfaces and objects such as buildings, vehicles and concrete surfaces. The volume of a pressure washer is expressed in gallons or litres per minute, often designed into the pump and not variable. The pressure, expressed in pounds per square inch, pascals, or bar (deprecated but in common usage), is designed into the pump but can be va

View Details

Sifting machine is a machine used to separate the products of grain milling by means of flat sieves that make successive circular movements on a horizontal plane. The main parts of a sifting machine are the drive mechanism and the set of sieves mounted in the housing. Machines can have one or two housings, crank or self-balancing drive, and varying numbers of units where different mixtures can be simultaneously separated. The mixture being separated falls from one horizontal or sometimes slightl

View Details

Retailer Turnstiles are designed for all one-way access. This makes these security systems a popular choice in supermarkets or retail stores that need to guide foot traffic in a certain direction. Scope of the Report: For industry structure analysis, the Retailer Turnstile industry is relatively concentrated. These manufacturers range from large multinational corporations to small privately owned companies compete in this industry. The top five producers account for about 40 % of the revenue

View Details

Die cut lids are packaging solutions with attractive printing and embossing for products such as milk, curd, yoghurt, juices, etc. that are packed in cups and hence requires a lid. The die cut lids can be applied on PP, PET, glass, ceramic cups and bottles in order to preserve the product. The die cut lids are made from paper, plastic and aluminium foils. The use of this materials make it easy for disposal. The major demand for die cut lids is anticipated from food and beverage industry which us

View Details

Log home, or called log house, is a structure built with horizontal logs interlocked at the corners by notching. Logs may be round, squared or hewn to other shapes, either handcrafted or milled. Scope of the Report: Household market is the largest consumer market of log homes worldwide. The origin of the log structure is uncertain. It is possible that it began in northern Europe sometime in the Bronze Age. By the time Europeans began to settle in America, there was a long tradition of using

View Details

Powered Pressure Washer is a high-pressure mechanical sprayer used to remove loose paint, mold, grime, dust, mud, and dirt from surfaces and objects such as buildings, vehicles and concrete surfaces. The volume of a pressure washer is expressed in gallons or liters per minute, often designed into the pump and not variable. The pressure, expressed in pounds per square inch, pascals, or bar (deprecated but in common usage), is designed into the pump but can be varied by adjusting the unloader valv

View Details

Transportation Ticket Vending Machine (TVM) is a convenient way to purchase one way and day passes. Ticket machines dispense train tickets at railway stations, transit tickets at metro stations and tram tickets at some tram stops and in some trams. The typical transaction consists of a user using the display interface to select the type and quantity of tickets and then choosing a payment method of cash, credit/debit card or smartcard. The ticket or tickets are printed and dispensed to the user.

View Details

Woodworking machines are used for process wood to get products with high precision and quality. Woodworking Machinery includes Drilling machinery, Painting machinery, Sanding machinery, Sawing machinery, Milling machinery, Edge sealing machinery, Plate-making machinery and so on. Scope of the Report: In the coming years there is an increasing demand for woodworking machines in the regions of United States that is expected to drive the market for more advanced woodworking machines. Downstream

View Details

Forklift truck, also known as fork truck, lift truck, or forklift, are motorized vehicles primarily used for independent lifting, movement, and placement of discrete loads throughout a facility. They form an essential part of the supply chain market. These mobile loading trucks can be outfitted with forks for pallet-based unit load picking and for loads that are not palletized. These vehicles can be used with a variety of attachments such as platforms, grippers, or clamps. The growth of customer

View Details

Bird Detection System is the system used to detect birds. The system mainly used near airports to help prevent the occurrence of bird strikes. It is also used for other places, such as wind farms, and bird migratory studies. Scope of the Report: The Major regions to produce Bird Detection System are North America, Europe and Asia-Pacific, which accounting for about 90 % of sales revenue in total. North America is the largest sales region (sales value share 51.83% in 2016). Bird Detection Sys

View Details

Pneumatic are the components that use a source of compressed air to power moving parts. Pneumatic use compressed air to transmit and control energy. Pneumatic systems commonly use compressed atmospheric air, as it is abundant and inexpensive. Scope of the Report: In the coming years there is an increasing demand for Pneumatic in the regions of United States and Europe that is expected to drive the market for more advanced Pneumatic. Growth in government budgets in the principal countries, in

View Details

In 2018, the global NDT (Non-Destructive Testing) Services market size was million US$ and it is expected to reach million US$ by the end of 2025, with a CAGR of during 2019-2025. This report focuses on the global NDT (Non-Destructive Testing) Services status, future forecast, growth opportunity, key market and key players. The study objectives are to present the NDT (Non-Destructive Testing) Services development in United States, Europe and China. The key players covered in this study

View Details

The RF Front-end Module market was valued at Million US$ in 2018 and is projected to reach Million US$ by 2025, at a CAGR of during the forecast period. In this study, 2018 has been considered as the base year and 2019 to 2025 as the forecast period to estimate the market size for RF Front-end Module. This report presents the worldwide RF Front-end Module market size (value, production and consumption), splits the breakdown (data status 2014-2019 and forecast to 2025), by manufacturers, re

View Details

The WiFi / 802.11 Modules market was valued at Million US$ in 2018 and is projected to reach Million US$ by 2025, at a CAGR of during the forecast period. In this study, 2018 has been considered as the base year and 2019 to 2025 as the forecast period to estimate the market size for WiFi / 802.11 Modules. This report presents the worldwide WiFi / 802.11 Modules market size (value, production and consumption), splits the breakdown (data status 2014-2019 and forecast to 2025), by manufacture

View Details

The Flat-Panel TV IC market was valued at Million US$ in 2018 and is projected to reach Million US$ by 2025, at a CAGR of during the forecast period. In this study, 2018 has been considered as the base year and 2019 to 2025 as the forecast period to estimate the market size for Flat-Panel TV IC. This report presents the worldwide Flat-Panel TV IC market size (value, production and consumption), splits the breakdown (data status 2014-2019 and forecast to 2025), by manufacturers, region, typ

View Details

The Power Management Integrated Circuits market was valued at Million US$ in 2018 and is projected to reach Million US$ by 2025, at a CAGR of during the forecast period. In this study, 2018 has been considered as the base year and 2019 to 2025 as the forecast period to estimate the market size for Power Management Integrated Circuits. This report presents the worldwide Power Management Integrated Circuits market size (value, production and consumption), splits the breakdown (data status 20

View Details

The Base Transceiver Station Antenna market was valued at Million US$ in 2018 and is projected to reach Million US$ by 2025, at a CAGR of during the forecast period. In this study, 2018 has been considered as the base year and 2019 to 2025 as the forecast period to estimate the market size for Base Transceiver Station Antenna. This report presents the worldwide Base Transceiver Station Antenna market size (value, production and consumption), splits the breakdown (data status 2014-2019 and

View Details

In 2018, the global Health Care Analytical Testing Services market size was million US$ and it is expected to reach million US$ by the end of 2025, with a CAGR of during 2019-2025. This report focuses on the global Health Care Analytical Testing Services status, future forecast, growth opportunity, key market and key players. The study objectives are to present the Health Care Analytical Testing Services development in United States, Europe and China. The key players covered in this stu

View Details

In 2018, the global Package Testing market size was million US$ and it is expected to reach million US$ by the end of 2025, with a CAGR of during 2019-2025. This report focuses on the global Package Testing status, future forecast, growth opportunity, key market and key players. The study objectives are to present the Package Testing development in United States, Europe and China. The key players covered in this study DDL, Inc Intertek SGS CSZ Testing Services Labora

View Details

The RF Power Amplifier for Cellular Terminal market was valued at Million US$ in 2018 and is projected to reach Million US$ by 2025, at a CAGR of during the forecast period. In this study, 2018 has been considered as the base year and 2019 to 2025 as the forecast period to estimate the market size for RF Power Amplifier for Cellular Terminal. This report presents the worldwide RF Power Amplifier for Cellular Terminal market size (value, production and consumption), splits the breakdown (da

View Details

The Strain Gage Sensor market was valued at Million US$ in 2018 and is projected to reach Million US$ by 2025, at a CAGR of during the forecast period. In this study, 2018 has been considered as the base year and 2019 to 2025 as the forecast period to estimate the market size for Strain Gage Sensor. This report presents the worldwide Strain Gage Sensor market size (value, production and consumption), splits the breakdown (data status 2014-2019 and forecast to 2025), by manufacturers, regio

View Details

The Cell Phone Chargers market was valued at Million US$ in 2018 and is projected to reach Million US$ by 2025, at a CAGR of during the forecast period. In this study, 2018 has been considered as the base year and 2019 to 2025 as the forecast period to estimate the market size for Cell Phone Chargers. This report presents the worldwide Cell Phone Chargers market size (value, production and consumption), splits the breakdown (data status 2014-2019 and forecast to 2025), by manufacturers, re

View Details

Market Reports Center © Copyright 2019 All rights reserved.

wire transfer
HDFC
ssl